دانلود مقاله Experimental verification of finite element model of the strainدرbaseddynamometer در word دارای 9 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد دانلود مقاله Experimental verification of finite element model of the strainدرbaseddynamometer در word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است
توجه : در صورت مشاهده بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی دانلود مقاله Experimental verification of finite element model of the strainدرbaseddynamometer در word ،به هیچ وجه بهم ریختگی وجود ندارد
بخشی از متن دانلود مقاله Experimental verification of finite element model of the strainدرbaseddynamometer در word :
سال انتشار: 1392
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
تعداد صفحات: 9
چکیده:
In this study, a FE Model of strain-based dynamometer was developed consisting of: octagonal rings, supporting plates and cutting tool. Since the accuracy of the dynamometer, highly depends upon the rings, therefore the FE model of the ring was analyzed separately and the results were verified by experiment. The experiment consists of making four rings with installed strain gauges on them. The applied boundary conditions and forces of the model, were the same as the ones of the real model, as far as possible. The measured strains on the faces of the real rings, were compared with those of the FE Model. The obtained results by the FE Model showed good agreement with the experiment. By the obtained results, one could couple the real dynamometer with the FE model to utilize in several applications such as minimizing the errors.Monitoring and measurement of cutting forces in machining process is of great importance in industry. The importance is due to the effect of the forces on tool-wear, finished surface, the heat generation, energy consumption, etc. One of the methods in measurement of the cutting forces is strain-based dynamometer in which the forces are measured based upon strain gauges fixed on the rings.
- ۹۵/۱۱/۳۰